ONLINE STORE

0

Temperature & Timer Controlled Misting Module

AU$242.00
Sold out
Price incl. GST (10%) AU$22.00
Sold out
Product Details

(Legacy Product superseded by the XP Range)

The TTCMM is a Temperature and Timer Controlled Misting Module Controller.
Specifically designed for use in mobile poultry caravans/tractors or fixed shed 12 Volt DC misting systems.
The TTCMM has a built in temperature sensor mounted on top of the control module and also incorporates a Delay ON & OFF Timer, this timer helps minimise the amount of water being used.

How it works:
Once the desired Temperature Set Point has been reached the Misting Pump will start and run through the Timed Misting Pump ON Cycle of 3 Minutes then switch OFF the Pump for 12 Minutes.
This timed ON/OFF Cycle continues as long as the Temperature sensed is above the Set Point.
The timing cycling minimises the amount of water being used while still providing a very efficient cooling effect via the mist.

What else will I need:

  • 12 Volt DC Diaphragm Pump – Recommended VEVOR type FL-30
  • A Misting Kit- There are a variety of misting kits available from Hardware Stores:

https://www.vevor.com.au

Holman and Nylex brand misting kits have both been tested by FarmTronics and are ideally suited for use with our TTCMM Module.

Specifications

Model Number

FT-TTCMM

Enclosure Type

Polycarbonate with Clear Lid UV Stabilised

Enclosure IP Rating

IP67 Fully Weatherproof

Enclosure Dimensions

H150mm x W100mm x D70mm

Overall Height

H200mm from the bottom Cable gland to the top of the Sensor

Enclosure Mounting Method

External Stainless Steel Mounting Clips (4 Off Supplied)

Cable Entry Method

1 Off M20mm IP67 Wiring Gland Located at bottom of Switchboard

TEMPERATURE Display Type

Red 7 Segment 3 digit LED display

Temperature Control Range

-50 to +130 Degrees Centigrade (User Adjustable) Default set to 35.0c

Temperature Control Accuracy

0.1 Degrees Centigrade

Sensor Type

Built in sensor mounted on top of enclosure

Display Refresh Rate

0.5 Seconds

TIMER Display Type

Red 7 Segment 3 digit LED display (Displays the SECONDS Countdown)

TIMER ON Cycle

ON for 180 Seconds (3 Minutes)

TIMER OFF Cycle

OFF for 720 Seconds (12 Minutes)

Input Power

12 Volts DC + or – 10 Percent

Field Wiring Connections

Large Gauge 4 Way Screw Terminal Strip

PUMP Relay Output

12 Volts DC 10 AMP

Main Power Fuse Rating/Type

10 Amp Automotive BLADE Fuse (Supplied)

Mains Switch

On/Off Main Switch

Warranty

12 Months from date of purchase

Support Service

Phone Support 7 Days a week from 9am to 3pm

Download User Manual

Share this product with your friends
Temperature & Timer Controlled Misting Module